Friday, December 22, 2017

Pre-Christmas Progress amongst the Pre-Christmas Madness

As I technically finished work on the 7th of December (to coincide with the beginning of school summer holidays), I figured that I had plenty of time to then finish the Medallion quilt by the 20th of December, when the office actually closed so I could pass it onto it's recipient as promised.  Little did I realise that of those 9 work days in between, I would spend 6 of those days at work.  Between working (both at home and at the office) I pushed and pushed (and sweated and sweated - it's been flipping hot here in NZ) and finally got the medallion quilt finished.  This was a true whoop whoop moment.

Measuring around 68x89" it is a sizeable single.  In hindsight I should have not chosen the bold orange borders on the courthouse steps blocks... but hey... it's finished, and this border will hang off the end of the bed.

I did a mix of stippling the black and white prints... and quilting the coloured sections.


And used the magic binding technique using a scrappy peeper, with the Sketch as the binding portion.  Looks like a really complicated piping treatment, but I can only be thankful that the Sketch hides a multitude of sins.


From the back.


I placed my label so that it would get sewn into the binding... and just needed to handstitch the three sides after it was completed.  This ensures no little fingers could get caught in an unsewn loop.




Having quilting free areas means a bit of puffiness... sometimes this is good...


And sometimes not so good.


If I had more time I would have quilted more areas, and not had this problem.  I thought about adding some feathered sections to the pink parts of the star - most of these sections sat flat with a bit of encouragement - but just ran out of time.


Now that this project is crossed off the list, I got back to sewing my Sew House Seven "The Tea House Top and Dress".

You can see from the line drawings that this pattern has seams through the front that give it shaping, and that the pocket sides are caught in this seam, as well as the side seam.  There is a choice between side ties that are also sewn into this seam, or a back tunnel that captures a narrow tie, that can then be tied to the front.


I've got far enough through the process to be able to try it on... still need to finish some seams, and hem the bottom and the sleeves.

With this very drapy rayon the pockets just sort of hang in a somewhat depressed sort of way - interestingly each side hangs slightly differently.  Rayon is actually one of the fabrics recommended on the pattern packet - but I accept that some rayons are more drapey than others, and I think this rayon is just a bit too much.

Not only does the top of the pocket drape down, but the fullness of the pocket drapes down over the bottom stitching lines.

I never did quite get the back yoke to sit properly.  To be honest I kinda hate the back of this dress - it is very smock like, in a 90yr old granny sort of way.  My poor sewing skills have done it no favours.


I chose to alter the ties - I really dislike having wide ties that you do up at the back - I always find they sit right on a back bone and dig in.  But I am also not a fan of ties that come around to the front.  So, I narrowed the ties on the front...


And also added the ties to the back... so that I could tie it up at the sides.

Regardless of the shaping of the dress - it is actually the ties that give it any shape at all.  The built in shaping from the seams creates fullness in areas where I don't seem to be all that full. 

I think I bit off more than I could chew with this pattern - both with the design and the fabric choice.  I'm not sure whether I will wear it if/when it gets finished, but I'm planning a slight hi/low hem line - and am omitting the cuffed sleeves - they will just get a narrow hem and we'll call it done. 

Lesson's learnt - remember to look at the line drawing in detail before deciding to buy a pattern based on what the sample looks like.  Also, do the fabric wrinkle test in the shop - and remember that even expensive rayon is not worth the angst.

Sunday, December 10, 2017

FMQ... Bring it on!

The medallion quilt is all basted and FMQ has started!  With a pre-Xmas deadline... this one will be a tight finish, as I'm not known for my quick quilting skills :o)


The backing fabric is a pretty wide back from Spotlight.  Even though I really like it, and it works terrifically with the front - I can't help but wonder if it is slightly creepy.


Although the Invisifil thread I've used on the centre white section broke ALL.  THE.  TIME.  I finally got this bit finished stitching at a seriously reduced speed.  So hard to get nice curves and even stitching going this slow.


Switching to another thread, I did a variety of fillers on the butterfly wings... spirals...


Feathers...


Sort of a greek key design...


And a stipple following a wiggly stem...


The grey border/sashing I have done a couple of FMQ wiggly lines.  I'm thinking about making this three lines, although you can hardly see it on the front, hence the back shot.


And the threads... a grey Wonderfil Invisifil 100wt in the sashing and a pretty pastel 40wt Gunold thread in the butterfly border.  The thread that keeps breaking is an off-white Invisifil on a cone.  The grey thread has been fine.  One of the mysteries of FMQ.


The first day of the school holidays is traditionally tree trimming day.  Nadia was in charge this time, although I heard Dylan giving his opinion along the way.  This year it is all about the tinsel and the lights... hardly any decorations.  Well... it does look pretty!


Sunday, December 3, 2017

Slow Sewing

As I approach clothes sewing projects now, I feel like I have a lot more patience and respect for the preparation side of the project.  With space set aside where I don't have to rush to get things laid out, pinned and cut in a short period of time (to allow TV viewing or life in general) - I can take my time, really trying to achieve a good result, and knowing that I can continue tomorrow if needed.

So it's been a quiet week of laying out fabric, cutting out pattern pieces and slowly working my way through the early stages of my dress pattern - stay stitching and those other weird practices that I always ignored in the past.  For some reason my Bernette sewing machine has hated sewing the rayon fabric I am using... so much to my disgust, I had to resew several sections where the sewing gathered up and the tension was crappy.  Luckily, my Brother Innovis was much better behaved.  I did end up with this rather oddly shaped yoke section.

Pretty sure this is supposed to lay flat.

Resewing has meant that it does indeed sit flat - although there are still the odd funny bits, I'm calling this a win.

This has knocked my confidence a bit, and I'm not sure now whether I'm going to like the finished product.  I have remembered why I don't like sewing with Rayon - it is just a beast to handle.  At this stage, all I can do is continue and hope for the best.

In general sewing shed news, I finally decided to remove the frame from my enormous custom built work desk, and use this space as work space - instead of general junk holding space.  I think this is about 3m long.


I also added a few new fat quarters to my stash... thanks The Country Yard!


And I added some new Denyse Schmidt patterns to my collection after a Black Friday sale with Hawthorne Threads.  Best of all, they don't charge freight on their pattern purchases... and these are some patterns I've had on my wish list for a while.


I have struggled with getting the last border done for my Medallion quilt.  Losing the fabric, and then the fusible web meant it was all just too hard.  Yesterday I played with some fonts and poster printing...


And after finally tracking down the other supplies I needed, fused and laid out the letters.  This is a 5 1/2" cut strip.


I think this will work :o)  Bring on the blanket stitch next week, when it is hopefully not too hot!